Premium 70/30 blended microfiber car wash mitt
Three separate washing tools all in one mitt
Use chenille noodle side and short-pile microfiber sides for painted surfaces, glass, plastics, metals and more
Use Bug Mesh to remove bug splatter from mirrors, grilles and front bumpers
Microfiber wash mitt holds tons of suds and water
Greenway's Multi Purpose Wash Mitt has multiple detailing tools combined in a microfiber wash mitt. You can easily remove heavy grime and debris using the soft and plush microfiber chenille noodle side and then flip the mitt over to the short-pile microfiber side, to remove grime from metal, glass, bumpers, plastic trim and around emblems.
The side of the mitt has a built in soft bug cleaning mesh which will allow effective removal of bug splatter. The blended 70/30 microfiber wash mitt is super soft, holds tons of suds and will not swirl or scratch the most delicate clear coats. The interior of the wash mitt features a waterproof barrier to keep your hand dry and allow for a comfortable wash experience.
How to Use
It is important to start with a clean wash bucket. This wash bucket should have never had silicone in the bucket. Silicone is typically used in tire dressings and can cause issues with the foaming capabilities of your Greenway’s Wash Solution. Many people believe that rinsing a bucket out that had wheel and tire brushes located in the bucket is good enough, but this is the furthest from the truth. Always start with a dedicated wash bucket that has never had contact with any silicone-based product.
Using a grit guard or another similar type of bottom bucket dirt separation device is always recommended for best results but is not always necessary depending on specific services you will be performing on a vehicle.
Place a few ounces of wash solution into the bucket and fill to the appropriate level with a high-pressure wash. Do not overuse any Greenway’s wash solution as they are extremely concentrated and a little goes a long way. Dip your wash mitt into the wash solution and began washing the vehicle from top to bottom. We suggest always using two wash buckets or two different colored wash mitts to avoid contamination. Many of your paint defects are actually induced by improper washing techniques. If the same wash mitt is used on the lower portions of a vehicle where heavy contamination can lay even after pre-rinsing the surfaces, this contamination can be transferred from the bottom to the top of the surfaces which can cause swirl marks, marring and fine scratches.
After washing the entire vehicle and rising off, simply store your wash mitt outside of the bucket and allow to air dry. Keeping your wash mitt immersed in water can cause premature breakdown of the fibers especially when using a high pH stripping wash.