Shopping Cart
Car soap with wax 2 ounces
Synthetic Wash and Wax
Car soap with wax 8 ounces
Car soap with wax 4 ounces
Car soap with wax 16 ounces
Synthetic Wash and Wax
Car soap with wax 5 gallon
Synthetic Wash and Wax
Car soap with wax 2 ounces
Synthetic Wash and Wax
Car soap with wax 8 ounces
Car soap with wax 4 ounces
Car soap with wax 16 ounces
Synthetic Wash and Wax
Car soap with wax 5 gallon
Synthetic Wash and Wax

Synthetic Wash and Wax

$1.99

 
  • Ultra-high foaming shampoo that contains a nano wax solution to help extend current protection & add a coat of protection until your next wash

  • Excellent cleaning properties but remains pH balanced

  • Guaranteed not to streak or stain the most delicate exterior surfaces

  • Solution helps suspend dirt particles in order to reduce the risk of creating swirl marks

  • Rinses easily which helps prevent water spots

  • Fortified with Nano Waxes which helps create extreme gloss, slickness and protection in one easy step

  • Safe for all coatings but can alter appearance

 

Greenway’s Wash and Wax Shampoo is fortified with synthetic Nano Wax polymers. Nano Waxes help create a better bond, gloss and slickness to the vehicle paint, which helps protect against environmental conditions for a longer period of time.

How to Use

Always start with a clean bucket that never had contact with silicone.  Silicone could have been present on a wheel and tire brush and then placed into that wash bucket.  Even if the bucket was cleaned, silicone could still be present and entirely “flatten” the sudsing capabilities of any shampoo solution.   Silicone is usually present in all your tire dressings and interior dressing products.  If any of these products were EVER located inside the bucket or something that contained silicone was placed in that bucket, do not use this bucket!

Wash and Wax can be diluted up to 128:1 (or more) and still remain a very effective shampoo solution.  After adding approximately one or two ounces of solution per one gallon of water, fill desired wash bucket up with high pressure water to desired level.  

After you apply and wash entire surface area, rinse surface area from top to bottom.  Greenway’s Wash and Shine  is an excellent product to use after this step for added gloss, protection and ease of drying.  Dry vehicle with microfiber drying towel or soft chamois.

 

Tech Tip

  • If you are completing the washing stage in the direct sun, you can always wash each side that is covered by some shade. After one side is washed, simply turn vehicle around to place unwashed side in shade

  • After the sides of the vehicle are complete, you can proceed to wash and prepare the other flat and vertical surfaces of the vehicle.  If you are using  Greenway’s Bugs B Gone,  break up the front end into sections to avoid having the product dry on the vehicle surface.  The bug removal stage should be done separately and the product should be completely rinsed before washing or prepping any other surface of the vehicle (we recommend doing bug removal prior to entire vehicle wash) This should be your first step

  • Most detailers simply use too much wash solution.  Professional, concentrated shampoos such as Wash and Wax, does not require a large amount of solution to be effective. Remember if you add too much solution rinsing could become difficult and time consuming in order to remove any remaining residue

  • Use a car shampoo such as Greenway’s Car Shampoo or Eco Wash that does not contain wax before a correction and protection detail. Adding wax to the vehicle before proceeding with any compounding, polishing, glazing, waxing or sealing stage is not recommended.

Reviews