Shopping Cart
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream
Greenway's Heavyweight 1000 Compound Cream

Greenway's Heavyweight 1000 Compound Cream

$9.99

 

  • Semi aggressive compound that quickly removes up to 1000 grit sanding marks

  • Contains synthetic micro-abrasives that break down during the buffing process leaving a scratch and swirl free finish

  • Removes medium to heavy scratches, swirl marks, oxidation and other paint defects

  • Contains no fillers

  • Prepares the surface for final polishing

  • Can be used with a dual action buffer, rotary polisher and long throw buffer

  • Effective on all paint finishes

  • Silicone free and body shop safe

 

Heavyweight 1000 easily cuts through moderate to severe paint defects, removes swirls, scratches, oxidation and 1000 grit sanding marks. Heavyweight 1000 is perfect for those severely neglected vehicle surfaces that need to be brought "back to life".  Some vehicles require more than polishing to rejuvenate the painted surfaces. Heavyweight 1000 is a great choice  when conducting a three or more stage paint correction and protection detail.

Unlike many heavy cut compounds, Heavyweight 1000 contains synthetic micro-abrasives that help remove the surface defects without leaving behind the typical abrasive compounding surface defects. Heavyweight 1000 leaves behind a scratch and swirl free finish which allows you to speed through the polishing stage.  Heavyweight 1000 is silicone free and body shop safe. There will not be any issues with "fish-eyes" and other paint defects that can be created with products that contain silicone.

 

How to Use

The most important step of the detail process is to start with a clean surface.  Preparation in regards to removing insect residue, tar, and paint contamination by using a clay process or fallout remover should be done prior to using this product.

Apply a small amount of product onto a foam or wool buffing pad, and slowly work into painted surface with the machine off. This will help avoid any type of product sling.  If you are an experienced detailer, slow acceleration of the machine can be started right away without the any product sling.

Work the product until the product becomes nearly invisible.   This is an area that is rushed by many auto detailers. If you do not work the product thoroughly, you will not allow the abrasives in the product to be diminished completely.

Wipe the area with a soft microfiber towel. Check your work and proceed to next panel If pad combination is working correctly with product. You can always switch the pad to a more aggressive foam pad if necessary.  Always start with the least aggressive pad and work your way up the pad aggressiveness level. This is especially true for the enthusiast detailer who does not have the experience in order to choose the correct pad and product combination quickly.

 

Tech Tip

  • Always work in small sections

  • Completely work product until nearly invisible

  • Always use dedicated microfiber towels to ensure no marring is placed back onto the surface after removed from the buffing stage

  • Paint surface preparation is the answer to a flawless finish

  • A quick detailer such as Wipe Away be used to aid in removal of excess product

  • Just because you do not see any product on your buffing pad, does not mean it is not present.  A mist of a detail spray held approximately 10 inches away from the pad, will release any product remaining inside the pad. This helps prevent product overload

  • Keep pad clean by using a pad cleaning tool frequently to avoid buildup of product

  • “Dry buffing” can easily be felt and seen when machine becomes unstable on painted panel. More product is needed to replace lubrication barrier between buffing pad and painted surface

 

 

Reviews

Customer Reviews

Based on 1 review Write a review