Use to dress interior components like dashboards, center consoles, door panels, plastics, and vinyl interior components
Will not attract excessive dust
Protects against UVA rays
Use concentrated or diluted 2:1 or 3:1 with water for even a lower sheen
Dress It All is a premium, emulsion-based car interior dressing used on vinyl, rubber, and plastic. Use Dress It All to dress interior components like dashboards, center consoles, door panels, and vinyl interior components. Dress It All is formulated to restore a clean look without the greasy feel to it. Dress It All leaves behind a clean, semi-gloss finish. Dress It All will not attract dust and protect your interior components from drying out. Apply Dress It All with a foam applicator for an even application. Many, if not all, microfiber wrapped applicators still contain a foam-filled center. These applicators are suitable to apply Dress It All. Dress It All can also be diluted at 2:1 for even a lower sheen.
How to Use:
Apply Dress It All with a foam-filled applicator. Using Dress It All with a microfiber towel or terry towel will absorb the product and not allow for the evenest application. A foam applicator will ensure even application. As the product soaks in the applicator, the product can easily be distributed among your surfaces when pressure is applied from the applicator onto the surface. For hard-to-reach areas, we suggest purchasing our Greenway’s Finishing Touch Release Spray. This aerosol product can get into all the smaller, hard-to-reach places with ease. If you are not familiar with the proper dilution methods, please purchase our 32-ounce empty bottle. These bottles have dilution marks embedded on the side of the bottle for quick and accurate diluting.
Always ask your customer what type of sheen they prefer, if any. Some customers will like a slightly glossier finish, while others want a matte finish. Since Dress It All is a water-based silicone product, it can be easily diluted with water. We always recommend cutting the dressing into small amounts, e.g. (16 ounces ready to use or 32 ounces prepared to use). Diluting a whole gallon of Dress It All with water will not allow you to have multiple versions of the product for each unique manufacture's surface. We like to use a 2:1 and a 3:1 dilution ratio. Depending on the manufacturer's material, Dress It All can look completely different on two different vehicle interiors. Dress It All can have a high gloss on one type of vehicle interior when used straight without dilution, while another shows a semi-gloss.
By having two different mixtures of Dress It All, you can quickly choose the appropriate mix that suits your customer's needs.
Since Dress It All is a water-based silicone product, it should not be used in or around a body shop. Paint defects could be induced into the technician’s paint process due to the silicone within the product. Dress It All also should not be used on any engine components. Silicone can lead to issues with oxygen sensors and helping dirt stick to unwanted surfaces. Our Siligone product should be used when conducting engine detailing or working within a body shop.