• Significantly concentrated aluminum cleaner and brightener

• Dilution rates of up to 30:1 for everyday cleaning. Use at a 100:1 ratio for mild surface cleaning 

• Helps maintain the looks of aluminum parts without discoloration or etching of the surfaces

• Works excellent with cold or hot water pressure washers

• Easily cleans rims, road film, diesel soot build-up, brake dust, and bugs without harming the surface

• Eco-friendly product - non-acid

Eco Brite is a very effective aluminum cleaner and brightener in one step. Our formula does not contain any harsh acids, causing surface etching and permanent surface damage. Eco Brite works safely cleaning and maintaining polished aluminum, chrome, stainless steel, powder-coated wheels, and painted wheels (matte or gloss finished).

Many detailers have become accustomed to using acid-based cleaners due to their speed and effectiveness.  Numerous acid-based cleaners contain hydrofluoric, sulfuric, phosphoric, and hydrochloric acids, which work great but can cause permanent damage to the vehicle's surface.

Eco Brite, when diluted appropriately, provides the car enthusiast or professional detailer with a safe, effective alternative while mimicking an acid-like solution. 

How to Use:

It is crucial to always cool down the surfaces before applying the solution. Start with a mild solution diluted at 100:1 in a chemical-resistant spray bottle. Spray the solution onto the surface starting from the BOTTOM TO THE TOP. To avoid any streaking, always follow this manner whether or not you are applying the solution with a foam cannon, brush, or sprayer.

Allow the solution to sit on the surface for approximately two to three minutes and then rinse with cold water. If stubborn grime is still left behind, use a less diluted solution and repeat the process.

Foam Cannon Use:  Fill the bottle approximately 25% with Eco Brite and top off with cold water. Set the metering knob to the minimum setting. Foam product onto the surface and let dwell for approximately 2-3 minutes. Lightly scrub the surface if needed and rinse the solution with water. RINSE FOAM CANNON THOROUGHLY AFTER USE. RUN COLD WATER THROUGH FOAM CANNON TO AVOID DAMAGE TO ANY INTERNAL PARTS.

DO NOT ALLOW PRODUCT TO COME IN CONTACT WITH WINDSHIELD OR GLASS

Car Detailing Tech Tip:

• Having a few different strength mixtures of Eco Brite is advised. Accomplish this by using our high-quality chemical-resistant spray bottles with dilution marking ratios. Our bottles will aid you in quick transitions between strength levels during a detailing project.