Formulation: Water-based

Scent: Customizable

Durability: None

Compatibility: All exterior surfaces

RTU: Ready To Use

Preparation:

• Start by washing and rinsing your vehicle to remove loose dirt and debris. This will prevent the clay bar from picking up large particles that could scratch the surface.
• Ensure the vehicle is in a shaded area or a cool environment to avoid the lubricant drying too quickly.

Spray the Lubricant:

Shake the clay bar lubricant bottle well. Generously spray the lubricant directly onto the section of the vehicle you are working on. Ensure the area is fully covered to provide a slick surface for the clay bar.

Use the Clay Bar:

Take a clean, pliable clay bar and gently glide it over the lubricated surface in straight lines. Avoid pressing too hard. The clay bar will pick up embedded contaminants as it moves.

Reapply as Needed:

Continuously spray the lubricant to keep the surface slick. If you feel the clay bar sticking or dragging, apply more lubricant to ensure smooth movement.

Wipe Off Residue:

After claying each section, wipe off any remaining lubricant and residue with a clean, soft microfiber towel.

Inspect the Surface:

Once finished, inspect the area. The surface should feel smooth and free of contaminants. Repeat the process on all areas of the vehicle as needed.

Final Step:

After using the clay bar and lubricant, the vehicle’s surface will be ready for polishing or waxing to achieve a flawless finish.