This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Greenway's Extract It All

$2.99

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

  • Ultra-concentrated upholstery and carpet cleaner for extractor machines

  • Use without an extractor machine - ultra-low foaming solution allows you to observe the area you are cleaning

  • Will not clog any of the internal parts of an extractor machine

  • Dilute 2 ounces per gallon of water for everyday cleaning, 4 ounces per gallon of water for heavy cleaning when used with an extractor machine

  • Dilute into a spray bottle or a pressurized sprayer when using the hand-applied method

  • Leaves carpet and upholstery surfaces cleaner, brighter, and softer to the touch

  • No sticky residue is left behind after the surface is dry

  • Pleasantly scented

 

 

Extract It All is an ultra-low foaming, high pH, super-concentrated fabric, and carpet cleaning solution. You can use Extract It All to clean the traffic area by hand or sprayed onto the surface to be extracted to break down dirt, the soil quickly, and other hard-to-remove stains.

If you do not have an extractor, you can use this product by hand also. Extract It All will remove water spots and other stubborn stains from all types of cloth seating, including the difficult to clean “sport” cloth seating. 

Extract It All leaves carpet and upholstery cleaner, brightener, and softer with each use, and no sticky residue is left behind. This product works exceptionally well with all extractors and will not leave a chalky residue in solution tanks. Extract It All has a pleasant fresh scent and is environmentally friendly.

 

How to Use:

It is essential to remove as much debris as possible with the vacuuming stage. If you can utilize an air compressor, this will help blow out the areas where a vacuum crevice tool cannot fit. We suggest using our Spot Lyft as a pre-treatment for the most effective stain removal if you have severe stains. You can apply Spot Lyft to the heavily stained areas and lightly scrub with a soft or stiff brush.

Determine your brush choice by the type of fabric you are trying to clean. For your standard cloth fabric, a medium to stiff brush will be sufficient. For more delicate fabrics such as microfiber, Alcantara, and some “sport” cloth seats, a boar’s hair, horsehair, or a microfiber towel can be used for gentle scrubbing. Depending on the type of material you are cleaning, use caution when using a terry towel. A terry towel has excellent absorption properties, and fibers are generally coarse. The fibers can remove the solution from the fabric and damage delicate material. Terry towels are best when used on carpeting, standard cloth, and when maximum absorption is needed.

Upon completion of the pre-treatment step, you can now proceed to your extractor stage or hand-cleaning stage. 

 

Extractor Machine Method:

Some users like to add Greenway’s Extract It All directly into the extractor machine, while others like to spray Extract It All over the entire affected areas and then extract.  Either method will work exceptionally well to help clean the carpet and upholstery.

If your extractor is heated, make sure to pre-heat it before using it and follow all manufacturers’ directions on proper usage. Extract all surface areas and then allow to dry thoroughly.

After the entire vehicle is complete, you can proceed to do another full vacuum of the interior. Doing another vacuum of the carpeting and upholstery will help gather any debris brought to the surface embedded into the material’s fibers. You do not want to use your extractor machine like a vacuum unless your device is equipped to do so.

 

Hand Scrub Method:

Determine your brush choice by the type of fabric you are trying to clean. For your standard cloth fabric, a medium to stiff brush will be sufficient. For more delicate fabrics such as microfiber, Alcantara, and some “sport” cloth seats, a boar’s hair, horsehair, or a microfiber towel can be used for gentle scrubbing. Depending on the type of material you are cleaning, use caution when using a terry towel. A terry towel has excellent absorption properties, and fibers are generally coarse. The fibers can remove the solution from the fabric and damage delicate material. Terry towels are best when used on carpeting, standard cloth, and when maximum absorption is needed.

If hot water is available, you can fill a small bucket and place the brush of choice in the bucket. After you apply Greenway’s Extract It All to the affected areas, dip your brush into the water solution, and apply to areas that need agitation. The hot water will help break up heavier stains and distribute product amounts to the material’s deeper fibers.

After the entire vehicle is complete, you can proceed to do another full vacuum of the interior.  Doing another vacuum of the carpeting and upholstery will help gather any debris brought to the surface embedded into the material’s fibers.

 

Car Detailing Tech Tip:

  • It is crucial always to follow the proper dilution. Many detailers feel that more product is better, which Is not necessarily true. Using an excessive amount of product at a higher concentration ratio will result in excess product left behind on the materials. Extra Extract It All will attract dirt from the materials it makes contact with (E.g., shoes, clothing, etc.).  Doing this will make all surfaces dirtier much quicker than usual.
  • If you have an extractor machine, a clear wand is the best type of tool to use for viewing purposes. You can observe how much material is left behind within the vehicle’s fibers. The clear wand will show the detailer when the extractor method is completed due absence of solution through the wand viewing area.
  • When working in a colder climate and time is of concern, it is advisable always to complete the interior detail first. Doing so will allow proper drying times before your customer picks up the vehicle. If you’re outside and do not have access to any drying machines, and the customer requests complete cleaning of the materials, a chamois works excellent in absorbing excess moisture. While terry towels and some microfiber towels can pull up excess moisture, a chamois typically can absorb more water than any towel can. This will also lead to fewer towels being and faster results. Dedicate this chamois for interior use only, and you should not use it on paintwork. We suggest always purchasing two different color chamois or marking (e.g., cutting, branding) the material to disguise its use.
  • Most utility vacuums come equipped with a dry filter pickup sleeve. These sleeves are not appropriate when a detailer does not utilize a carpet cleaning machine and relies on your vacuum for dry and wet pickup. Once the dry filter becomes saturated with the solution, filter breakdown and clogging occur at the motorhead. The motorhead is then further strained, and debris passes through the material into the assembly portion. Vacuum lifespan is significantly shorter, and vacuum replacement is frequent. Investing in a foam filter, which is usually less than $5.00, can extend the life of your vacuum for years. The vacuum manufacturer does not grant most warranties due to the vacuum design for commercial use and debris inside the motorhead. Most small business owners do not have the funds to purchase a commercial unit right away, and using a “contractor” grade type of vacuum will last for years, with the appropriate filter always attached.  Never worry about the size of the debris tank. As detailers, we vacuum small debris, and portability and horsepower are much more of a concern. A 4 or 5-gallon recovery tank is more than ample for any detail shop, whether large or small.
  • Always utilize the proper extension cord when using an extractor machine. These machines typically have a high amperage draw and can be ruined if used too thin and too long of an extension. Make sure to check with the manufacturer on which cord is suitable for your particular model.  If you are a mobile detailer and want to run an extractor using a generator, make sure your generator can handle the machine’s initial amp draw. Underpowering the machine can hurt both pieces of equipment.

This content type will accept rich text to help with adding styles and links to additional pages or content. Use this to add supplementary information to help your buyers.

You can use product metafields to assign content to this tab that is unique to an individual product. Use tabs to highlight unique features, sizing information, or other sales information.