Greenway’s Ace Wax is an extremely high quality, pre-softened white paste wax that is designed for easy application. Ace applies very evenly, smoothly and wipes off extremely easily. Ace carnauba paste wax produces an extreme amount of depth and a wet gloss appearance to any painted surface. Ace wax is a cream type of consistency which contains zero abrasives or cleaning properties and provides a durable layer of protection against the environmental elements.
Ace paste wax is our top of the line wax that Greenway’s Car Care Products has to offer. The highest quality of ingredients is used to create a wax that takes your vehicles paintwork to a whole new level. Paint will be extremely glossy with pronounced depth, water will bead and sheet off the surface to help prevent water spots. Ace can be topped with additional coats to provide a stronger paintwork barrier. Ace works on paintwork, glass, polishes metal components and clear plastics. Ace will significantly enhance any color paint finish and help protect your vehicles finish from oxidation, water spots. staining, industrial fallout and more.
Many competitor’s waxes are extremely difficult to apply, cake up on the vehicle surface and requires tons of elbow grease for both the application and removal. Ace paste wax is guaranteed to be one of the easiest, highest quality waxes available. Using inferior, cheap waxes that are difficult to apply and remove can cause marring or swirl marks on the paintwork. Since Ace paste wax applies and removes with almost no pressure needed, we recommend using Ace paste wax and any of our high-quality microfiber towels on the most sensitive painted surfaces. While Ace is excellent to use on any make of vehicle, it is especially useful when dealing with “soft” clear coats. Once your try Greenway’s Ace paste wax, you will be “blown away” on the appearance and protection it will create.
How To Use
Ace wax is perfect to use on a vehicle where paint correction has already been achieved or the vehicle is free of minor and major defects. While Ace will provide some "filling/masking" properties, Ace Wax is a non-abrasive type of product. Ace Wax is typically your final step in regards to having long term paint protection. If your vehicle has oxidation, swirl marks, scratches and other paint defects, you would have to a use a pure polish, one-step product or another product to remove light to moderate imperfections before the application of Ace Wax. We recommend the above steps for the best results, but these additional steps are purely optional. It all depends on what level of paint correction before protection that you are trying to achieve.
Even if you are not proceeding with the paint correction phase, proper surface preparation is the key. Clay bar treatment, tar removal and bug removal should be done if necessary. Embedded contamination on the surface will not allow wax to bond to surface. Application of product is more difficult as well as removal.
It is advisable to always work in small sections approximately 2 feet x 2 feet. Apply in a back and forth motion with a microfiber applicator, allow product to haze and then remove with a soft microfiber towel. Always use a quality microfiber towel to avoid inducing any marring on the paint! Ace can also be applied to entire vehicle and then removed, but if extreme heat or humidity conditions are present, the smaller sections of application are advisable.
If you are applying Ace with a slow speed buffer, many of the newer vehicles contain so many curves, foam buffing pad might come in contact with unpainted plastic components. This contact can cause staining and color loss of the unpainted plastic. Exterior trim could always be treated with our Finishing Touch Detail Spray. The detail spray will apply a light silicone coating over the plastic, which will help prevent any stain. Any residue from any exterior applied product, will wipe off with ease and help prevent staining the plastic. While hand application is more precise, it also takes longer when compared with a slow speed machine technique.
Always use a soft, non-abrasive finishing pad and run your machine at a very low speed. Ace Wax is not meant to be dismissed through the use a buffer at a high speed. Running a buffer at high speed, maybe cause unsatisfactory results in regard to smooth application and easy of removal.
$4.99 - $54.99
$5.99 - $64.99
$7.99 - $89.99
$8.99 - $99.99
$8.99 - $79.99
$6.99 - $59.99
$11.99 - $99.00