• Ultra-high foaming, super-concentrated wash and wax shampoo - 200:1 solution

• Contains Carnauba Wax which helps extend current protection and adds a coat of protection until your next wash

• Excellent cleaning properties and remains pH balanced

• Guaranteed not to streak or stain the most delicate exterior surfaces

• Helps suspend dirt particles to reduce the risk of creating swirl marks

• Rinsing quickly, Carnauba Wax and Wash helps prevent water spots

• Creates extreme depth, slickness, and protection in one easy step

• Safe for all-ceramic coated vehicles but may alter vehicle appearance

• Wash and Wax with a ceramic blend

• Customize with your favorite scent and size

Greenway’s Carnauba Wash and Wax Shampoo are fortified with Carnauba Wax. Carnauba Wax helps create depth to the paintwork and provides slight protection between washes. This product will not strip any material already placed on the vehicle clearcoat but protect and extend any existing product.  

Our wash and wax is also an excellent shampoo to use, even if you do not protect your vehicle. Greenway’s Carnauba Wash and Wax provide a very high foaming solution with thick suds, which helps reduce the chance of inducing swirl marks and provides ultimate lubrication.  

How to Use:

Always start with a clean bucket that never had contact with the silicone. Silicone could have been present on a wheel and tire brush and then placed into that wash bucket. Even if you cleaned the bucket, silicone could still be present and entirely “flatten” the sudsing capabilities of any shampoo solution. Silicone is usually present in all your tire dressings and interior dressing products. If products or something containing silicone were EVER inside the bucket, DO NOT USE THE BUCKET!

Wash and Wax can be diluted up to 128:1 (or more) and remain a very effective shampoo solution. Fill the desired wash bucket up with high-pressure water to the desired level after adding approximately one or two ounces of solution per one gallon of water.  

After you apply and wash the entire surface area, rinse the surface area from top to bottom. Greenway’s Wash and Shine is an excellent product to use after this step for added gloss, protection, and ease of drying. Dry vehicle with microfiber drying towel or soft chamois.

Car Detailing Tech Tip:

• If you complete the washing stage in the direct sun, you can always wash each side covered in shade. After cleaning one side, turn the vehicle around to place the unwashed side in the shade.

• After the vehicle’s sides are complete, you can wash and prepare the car’s other flat and vertical surfaces. If you are using Greenway’s Bugs B Gone, break up the front end into sections to avoid having the product dry on the vehicle surface. Do the bug removal stage separately. The product is rinsed entirely before washing or prepping any other vehicle’s surface (we recommend doing bug removal before the entire vehicle wash). Bug removal and any other preparation should be your first step.

• Most detailers use too much wash solution. Professional, concentrated shampoos such as Wash and Wax do not require a large amount of solution to be effective. Remember, rinsing could become difficult and time-consuming to remove any remaining residue if you add too much solution.

• Use a car shampoo such as Greenway’s Car Shampoo or Eco Wash that does not contain wax before a correction and protection detail. We do not recommend adding wax to the vehicle before proceeding with any compounding, polishing, glazing, waxing, or sealing stage.