Supreme | Quick Detailing Auto Ceramic Sealant Spray
Spray and wipe formula for ease of application
Provides protection for up to 1 year with only one application
30 percent active ceramic solution provides longevity and high-gloss shine
Creates a highly hydrophobic and oleophobic contact surface
Easily recoat if needed every 4 to 6 months
Must be applied to cool shaded surface
Can apply to a damp surface
Supreme is a quick detailer ceramic spray sealant that provides excellent gloss, extreme slickness, longevity, and the ultimate hydrophobic and oleophobic coated surface. Supreme is superior in protecting against acid rain, tar, corrosion, chemicals, and UV rays.
With an active 30 percent ceramic base, Supreme provides excellent longevity in a spray and wipe application. Use on the entire exterior of your vehicle to protect paintwork, glass, trim, rims, and rubber pieces.
Depending on how the exterior of your vehicle is maintained, Supreme can last up to 1 year in one easy spray and wipe application. If your vehicle is subjected to touchless car washes that utilize both high and low pH wash solutions, you can quickly recoat the surface every 4 to 6 months or as needed.
A properly cleaned vehicle is an essential application approach. You will need to remove any wax, sealant, or any other protective coating on the surface. Complete your wash by using our Cleanse Shampoo or Wikked Suds during the wash stage or by using Fresh on the car after the washing and drying stage. If the vehicle has any overspray or other particles on the clearcoat, please remove these items by using a clay bar treatment or fallout remover.
Apply Supreme to a dry surface. After rinsing all the remaining cars, shampoo off your vehicle, dry the car and spray Supreme onto the surface. Work in small 2 foot by 2-foot sections and immediately wipe off Supreme after spraying each section. If the product is hard to remove, dampen a clean microfiber towel and wipe the surface again. Follow up with a dry microfiber towel. We do not suggest applying Supreme in hot, sunny climates. Supreme will be difficult to remove and streak the surface.
Typically, 2 to 6 ounces of Supreme are required to coat an entire vehicle. The amount of product used can significantly increase depending on the trigger type you choose. Some triggers put out much more ml per stroke!
We recommend using a quality microfiber towel to apply and remove the coating. As you apply the ceramic coating, you will observe that most of the product will actually "flash" off the surface, allowing for less wiping, quicker application, and reduced chance of marring.
You can use any standard pH-balanced shampoo when washing your vehicle, but we do not recommend using shampoos with wax in them. While the wax will not harm the coating, the wax will alter the coating's appearance and the characteristics of the water and dirt behavior. When the vehicle has a large amount of dirt on the surface, the water sheeting ability is not as apparent, but PROTECTION IS NOT COMPROMISED. Wash and dry the vehicle, which will allow for characteristics of Rain Coat to return.
As with many quick coatings, a user can expect to see longevity from approximately 6 months to a year, but driving patterns, vehicle storage, automated touchless car washes, and other factors can increase or decrease coating lifespan.
Driving your vehicle through a touchless car wash or using heavy degreasers on the car will significantly affect the coating's longevity. We recommend hand washing your vehicle to avoid the low pH and high pH aggressive pre-soaks that you may find at many touchless car washes.
This content type will accept rich text to help with adding styles and links to additional pages or content. Use this to add supplementary information to help your buyers.
You can use product metafields to assign content to this tab that is unique to an individual product. Use tabs to highlight unique features, sizing information, or other sales information.